View EM6520_2385217.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

em65xx copyright ? 2005, em microelectronic-marin sa 1 www.emmicroelectronic.com em65xx datasheet mfp versions of em66xx (mask rom) em microelectronic-marin sa tel +41 32 755 51 11 fax +41 32 755 54 03 http: // www.emmicroelectronic.com em microelectronic - marin sa
em65xx copyright ? 2005, em microelectronic-marin sa 2 www.emmicroelectronic.com table of contents 1. ge neral ..................................................................................................................... ... 3 ordering in formation .................................................................................................. 3 2. em 6503 ...................................................................................................................... ...... 4 3. em 6504 ...................................................................................................................... ...... 7 4. em 6505 ...................................................................................................................... .... 11 5. em 6517 ...................................................................................................................... .... 15 6. em 6520 ...................................................................................................................... .... 16 7. em 6521 ...................................................................................................................... .... 17 8. em 6522 ...................................................................................................................... .... 18 9. em 6540 ...................................................................................................................... .... 19 10. package di mensions ........................................................................................... 23 11. ordering information ....................................................................................... 28
em65xx copyright ? 2005, em microelectronic-marin sa 3 www.emmicroelectronic.com 1. general the em65xx is the multiple field programmable version of the corresponding em66xx 4 bit microcontroller the program rom is replaced by non volatile memory, which can be programmed up to 100 times. functionally, the two types are equal, except the metal options which are defined in the following pages. electrically, the mfp ?s work above 2.0v and need more current, see the tables in the following description. the programming is done with the em mfp programmer, either by putting the device onto the programmer or connecting it with the connector at the back to your board. handling procedures this devices have built-in protection against high static voltages or electric fields; however, anti-static precautions should be taken as for any other cmos component. unless otherwise specified, proper operation can only occur when all terminal voltages are kept within the supply voltage range. absolute maximum ratings min. max. units power supply vdd-vss - 0.2 + 5.5 v input voltage vss - 0.2 vdd+0.2 v storage temperature - 40 + 125 c electrostatic discharge to mil-std-883c method 3015 -2000 +2000 v maximum soldering conditions 10s x 250c stresses above these listed maximum ratings may c ause permanent damage to the device. exposure beyond specified electrical characteristics may a ffect device reliability or cause malfunction. ordering information the mfp?s should be used for engineering purposes only. no volume production must be planned. em65xx qin vdd qout test vreg vss em mfp programmer your pcb
em65xx copyright ? 2005, em microelectronic-marin sa 4 www.emmicroelectronic.com 2. em6503 input/output ports all ports if selected as outputs are push-pull outputs (driving high / low). inputs are not blocked when output is selected and outputs comes hi-z in sleep mode. input/output port options pull-up yes / no pull-down yes / no nch-open drain yes / no input blocked when output yes / no output hi-z in sleep mode yes / no 0 1 4 5 6 a0 pa0 input no no a1 pa1 input no no a2 pa2 input no no a3 pa3 input no no b0 pb0 in/out no no no no yes b1 pb1 in/out no no no no yes b2 pb2 in/out no no no no yes b3 pb3 in/out no no no no yes c0 pc0 in/out no no no no yes c1 pc1 in/out no no no no yes c2 pc2 in/out no no no no yes c3 pc3 in/out no no no no yes d0 pd0 in/out no no no no yes d1 pd1 in/out no no no no yes d2 pd2 in/out no no no no yes d3 pd3 in/out no no no no yes porta reset no porta reset option is selected no porta reset combination pa0 & pa1 logic and input reset pa0 & pa1 & pa2 logic and input reset pa0 & pa1 & pa2 & pa3 logic and input reset 0 1 2 3 ra porta reset x supply voltage level detector t= -10c to 60c symb. parameter min. typ. max. unit vsvld1 svld voltage level1 2.25 2.5 2.75 v vsvld2 svld voltage level2 3.15 3.5 3.85 v vsvld3 svld voltage level3 3.87 4.3 4.73 v
em65xx copyright ? 2005, em microelectronic-marin sa 5 www.emmicroelectronic.com electrical specifications standard operating conditions parameter value description temperature 0c...+60c vdd +2.0 ...+5.0v vss 0 v (reference) cvreg min. 100nf vreg logic supply capacitor fq 32768 hz nominal frequency rqs 35 kohm typical quartz serial resistor cl 8.2pf typical quartz load capacitance df/f +/- 30 ppm quartz frequency tolerance dc characteristics - power supply pins vdd=3.0v, t=25c (note4) (unless otherwise specified), vreg not shorted to vdd parameter conditions symb. min. typ. (note1) max. unit active supply current +25c (note2) i vdda 9.0 15.0 a active supply current (in active mode) (note2) (note3) 0c...+60c i vdda 20.0 a standby supply current +25c i vddh 1.7 4.0 a standby supply current (in halt mode) (note3) 0c...+60c i vddh 7.0 a sleep supply current +25c i vdds 0.7 2.0 a sleep supply current (sleep =1) (note3) 0c...+60c i vdds 5.0 a regulated voltage 0c...+60c vreg 1.6 2.5 v vdd=5.0v, t=25c (note4) (unless otherwise specified), vreg not shorted to vdd parameter conditions symb. min. typ. (note1) max. unit active supply current +25c (note2) i vdda 13.0 18.0 a active supply current (in active mode) (note2) (note3) 0c...+60c i vdda 20.0 a standby supply current +25c i vddh 1.8 5.0 a standby supply current (in halt mode) (note3) 0c...+60c i vddh 10.0 a sleep supply current +25c i vdds 0.7 2.0 a sleep supply current (sleep =1) (note3) 0c...+60c i vdds 5.0 a note1: for current measurement typical quartz described in operating conditions is used. all i/o pins without internal pull up/down are pulled to vdd externally. note2: test loop with successive writing and reading of two different addresses with an inverted values (five instructions should be reserved for this measurement), note3: not tested at temperature if delivered in chip form. note4: test conditions for active and standby supply current mode are: qin = external square wave, from rail to rail of vreg (regulated voltage) with 100nf capacitor on vreg. fqin = 33khz.
em65xx copyright ? 2005, em microelectronic-marin sa 6 www.emmicroelectronic.com today?s versions i/o?s vld levels remarks em6503p02 as defined as defined - die, pad location and size pa2 y=941 y=0 y=?215 p b 0 x = 1 8 3 9 p b 1 x = 2 3 7 0 p b 2 x = 2 9 0 1 p b 3 x = 3 4 3 2 x = 0 nc pc0 y=2731 stb/rst y=2477 vss y=2203 oscin y=1997 x = 4 8 1 7 p d 2 x = 1 0 2 6 p d 1 x = 1 6 4 8 p d 0 x = 2 3 6 9 p c 3 x = 3 8 2 8 chip size is x = 5029 microns by y = 4419 microns em6503 or x = 198 mils by y = 174 mils x = ? 2 1 2 all dimensions in microns heith of the die z = 11 mils y=1205 pa1 y=1469 pa0 y=2465 vbat y=2719 vddca y=3435 reset oscout y=1221 y=3705 pc1 y=3991 x = 4 6 3 3 p d 3 x = 4 0 5 p a 3 x = 5 2 2 y=4204 p c 2 x = 4 0 8 2 x = 4 5 4 5 t e s t x = 4 6 0 6 nc package so24 package. see dimensions in section 10.
em65xx copyright ? 2005, em microelectronic-marin sa 7 www.emmicroelectronic.com 3. em6504 input / output ports the em6504 - mfp version of em6604 has no input pull-up or pull-down resistors. user has to put an external resistor if needed in the application. in metal rom version (em6604) user can select resistors described in electrical parameters and input/output port mask option. for portc input/output selection there is an additional register in em6504 (register pcoe at address 60hex) instead of metal mask in em6604. for porta rising/falling interrupt edge selection there is an additional register in em6504 (register pairqedge at address 63hex) instead of metal mask in em6604. portc input/output metal options are replaced by register pcoe in em6504 mfp version. this register is described below. input / output ports option output clocked pull-dow n r > 1m? clocked pull-up r > 1m? pull- down r = 30k? pull-down r = 150k? pull-up r = 30k? pull-up r = 150k? no input pull-up or pull- down 0 1 2 3 4 5 6 7 a0 pa0 input x a1 pa1 input x a2 pa2 input x a3 pa3 input x c0 pc0 in/out pcoe0 x c1 pc1 in/out pcoe1 x c2 pc2 in/out pcoe2 x c3 pc3 in/out pcoe3 x the mfp em6504 option selection is showed by ? x ? and ? pcoex ? porta interrupt edge this metal options are replaced by register pairqedge in em6504 mfp version. the register is described below. porta interrupt edge option interrupt on input?s rising edge interrupt on input?s falling edge 8 9 i0 pa0 ? irq pa0r = 1 pa0r = 0 i1 pa1 ? irq pa1r = 1 pa1r = 0 i2 pa2 ? irq pa2r = 1 pa2r = 0 i3 pa3 ? irq pa3r = 1 pa3r = 0 the mfp em6504 porta interrupt edge option is selected by values in register pairqedge
em65xx copyright ? 2005, em microelectronic-marin sa 8 www.emmicroelectronic.com watchdog metal option the watch-dog timer is always active. watchdog metal option watch-dog timer active watch-dog timer inactive w0 wd timer x supply voltage level detector t= -10c to 60c symb. parameter min. typ. max. unit vsvld1 svld voltage level1 2.02 2.30 2.38 v additional registers in em6504 there are two additional registers replacing metal options in em6604. register name add hex add dec reset value write_bits read_bits remarks b'3210 read/write_bits pairqedge 63 99 0000 0: pa0r 1: pa1r 2: pa2r 3: pa3r port a irq edge 1 = rising 0 = falling pcoe 60 96 0000 0: pcoe0 1: pcoe1 2: pcoe2 3: pcoe3 port c output enable 1 = output 0 = input because these two registers replace the metal option in em6604 it is advised that they are written as first two instructions in the main program and that they are executed only once. they should not be changed later in the program because the metal options in em6604 are fixed. electrical specifications standard operating conditions parameter value description temperature 0c...+60c vdd +2.0 ...+5.0v vss 0 v (reference) cvddca min. 100nf (note1) vreg switched logic supply capacitor fq 32768 hz nominal frequency rqs 35 kohm typical quartz serial resistor cl 8.2pf typical quartz load capacitance df/f +/- 30 ppm quartz frequency tolerance note1: this capacitor maintains the regulated supply to the core when the core has been isolated by the internal supply switch during driving the high current outputs. the user should be aware that the selection of this capacitor will dictate the time that the core can be isolated.
em65xx copyright ? 2005, em microelectronic-marin sa 9 www.emmicroelectronic.com dc characteristics - power supply pins vdd=3.0v, t=25c (unless otherwise specified) parameter conditions symb. min. typ.(note5) max. unit active supply current +25c (note2) i vdda 9.0 15 a active supply current (in active mode) (note2 / 3 / 4) 0c...+60c i vdda 20 a standby supply current +25c i vddh 2 4 a standby supply current (in halt mode) (note3 / 4) 0c...+60c i vddh 7 a ram data retention vrd 1.3 v vddca regulated voltage !! vdd ca 1.6 2.0 2.6 v por voltage 0c...+60c v por 0.9 1.40 v svld voltage v svld 2.25 2.5 2.8 v vdd=5.0v, t=25c (unless otherwise specified) parameter conditions symb. min. typ.(note5) max. unit active supply current +25c (note2) i vdda 13 18 a active supply current (in active mode) (note2 / 3 / 4) 0c...+60c i vdda 20 a standby supply current +25c i vddh 1.8 5 a standby supply current (in halt mode) (note3 / 4) 0c...+60c i vddh 10 a note2: test loop with successive writing and reading of two different addresses with an inverted values (five instructions should be reserved for this measurement), note3: not tested at temperature if delivered in chip form. note4: test conditions for active and standby supply current mode are: qin = external square wave, from rail to rail of vreg (regulated voltage) with 100nf capacitor on vreg. fqin = 33khz. note5: for current measurement typical quartz described in operating conditions is used. all i/o pins without internal pull up/down are pulled to vdd externally.
em65xx copyright ? 2005, em microelectronic-marin sa 10 www.emmicroelectronic.com todays versions i/o?s vld levels remarks em6504p02 as defined as defined - die, pad location and size package so24 package. see dimensions in section 10. y=?208 x = 0 x = 4 7 6 4 x = ? 2 1 0 all dimensions in microns qin y=163 y=939 qout y=1311 reset y=2938 vss y=3343 test y=4030 vss y=290 y=4237 x = 5 4 8 v d d c a x = 8 1 4 p a 0 x = 1 4 8 7 p a 1 x = 3 1 5 6 p a 2 x = 3 5 9 1 p a 3 x = 4 0 6 8 s t b / r s t p c 3 x = 6 3 4 p c 2 x = 1 2 3 8 p c 1 x = 1 8 4 2 p c 0 x = 2 4 4 6 v b a t 1 x = 3 2 8 2 x = 4 5 5 0 y=108 pb0 y=1031 y=871 pb1 y=1792 y=1632 pb2 y=2841 y=2681 pb3 y=3602 y=3442 x = 3 5 2 6 y=0 y=3686 buzzer x = 2 7 y=0 heith of the die z = 11 mils or x = 195 mils by y = 175 mils em6504 chip size is x = 4953 microns by y = 4445 microns
em65xx copyright ? 2005, em microelectronic-marin sa 11 www.emmicroelectronic.com 4. em6505 input/output ports all ports if selected as outputs are push-pull outputs (driving high / low). inputs are not blocked when output is selected and outputs stays active also in sleep mode. input/output port options pull-up yes / no pull-down yes / no nch-open drain yes / no input blocked when output yes / no output hi-z in sleep mode yes / no 0 1 4 5 6 a0 pa0 input no no a1 pa1 input no no a2 pa2 input no no a3 pa3 input no no b0 pb0 in/out no no no no no b1 pb1 in/out no no no no no b2 pb2 in/out no no no no no b3 pb3 in/out no no no no no c0 pc0 in/out no no no no no c1 pc1 in/out no no no no no c2 pc2 in/out no no no no no c3 pc3 in/out no no no no no d0 pd0 in/out no no no no no d1 pd1 in/out no no no no no d2 pd2 in/out no no no no no d3 pd3 in/out no no no no no porta reset no porta reset is selected. no porta reset combination pa0 & pa1 logic and input reset pa0 & pa1 & pa2 logic and input reset pa0 & pa1 & pa2 & pa3 logic and input reset 0 1 2 3 ra porta reset x supply voltage level detector t= -10c to 60c symb. parameter min. typ. max. unit vsvld1 svld voltage level1 2.02 2.30 2.38 v vsvld2 svld voltage level2 3.70 4.00 4.30 v vsvld3 svld voltage level3 4.15 4.50 4.86 v
em65xx copyright ? 2005, em microelectronic-marin sa 12 www.emmicroelectronic.com rc oscillator adjustment on the em6505 (mfp version only) register name add hex add dec power up value write_bits read_bits remarks b'3210 read/write_bits rc_adj_low 66 102 0001 0: oscadj[0] 1: oscadj[1] 2: oscadj[2] 3: oscadj[3] ---- adjustment of rc oscillator (4 lsb) rc_adj_high 67 103 1000 0: oscadj[4] 1: oscadj[5] 2: oscadj[6] 3: oscadj[7] ---- adjustment of rc oscillator (4 msb) on the em6605 (rom version), the adjustment of the rc oscillator is done by metal option (refer to chapter 14 of the em6605 datasheet). on the em6505 (mfp version), there is no metal option to adjust the frequency range. adjusting the 8 bits contained in registers ?rc_adj_low? and ?rc_adj_high? sets the frequency. the bit ?oscadj[7]? selects the frequency range: low or high frequency range (refer to chapter 4 of the em6605 datasheet). the others bits as well as the external resistor on pin 10, are used to adjust more precisely the frequency. the frequency has to be in the range of 30khz to 300khz (refer to chapter 17.7 of the em6605 datasheet). electrical specifications standard operating conditions parameter value description temperature 0c...+60c vdd +2.0 ...+5.0v vss 0 v (reference) cvreg min. 100nf regulated voltage capacitor tow. vss rext 50k - 400k external r to set clock frequency cvreg : this capacitor maintains the regulated supply to the internal logic. dc characteristics - power supply pins for frequency range of 30 - 300 khz vdd=5.0v, t=25c, f=32khz (note1) (unless otherwise specified) rext 330k parameter conditions symb. min. typ. (note1) max. unit active supply current +25c (note2) i vdda 30.0 40.0 a active supply current (in active mode) (note2) (note3) 0c...+60c i vdda 50.0 a standby supply current +25c i vddh 17.0 20.0 a standby supply current (in halt mode) (note3) 0c...+60c i vddh 40.0 a sleep supply current +25c i vdds 1.0 2.0 a sleep supply current (sleep =1) (note3) 0c...+60c i vdds 5.0 a regulated voltage vreg not at vdd vreg 1.5 2.0 2.5 v
em65xx copyright ? 2005, em microelectronic-marin sa 13 www.emmicroelectronic.com vdd=5.0v, t=25c, f=200khz (note1) (unless otherwise specified) rext 62k parameter conditions symb. min. typ. (note1) max. unit active supply current +25c (note2) i vdda 80.0 100.0 a active supply current (in active mode) (note2) (note3) 0c...+60c i vdda 120.0 a standby supply current +25c i vddh 30.0 40.0 a standby supply current (in halt mode) (note3) 0c...+60c i vddh 50.0 a sleep supply current +25c i vdds 1.0 2.0 a sleep supply current (sleep =1) (note3) 0c...+60c i vdds 5.0 a note1: for current measurement the corresponding resistor for targeted frequency 20% is selected; rext : external resistor between the rcin and vss pins. all i/o pins without internal pull up/down are pulled to vdd externally. note2: test loop with successive writing and reading of two different addresses with an inverted values (five instructions should be reserved for this measurement), note3: not tested at temperature if delivered in chip form.
em65xx copyright ? 2005, em microelectronic-marin sa 14 www.emmicroelectronic.com today?s versions i/o?s vld levels remarks em6505p02 as defined as defined - die, pad location and size pa2 y=945 y=0 y=?208 p b 0 x = 1 8 3 9 p b 1 x = 2 3 7 0 p b 2 x = 2 9 0 1 p b 3 x = 3 4 3 2 x = 0 pc0 y=2637 stb/rst y=2383 vss y=2109 rcout y=1890 x = 4 7 9 5 p d 2 x = 1 0 2 6 p d 1 x = 1 6 4 8 p d 0 x = 2 3 6 9 p c 3 x = 3 8 2 8 chip size is x = 5003 microns by y = 4419 microns em6505 or x = 197 mils by y = 174 mils x = ? 2 0 8 all dimensions in microns heith of the die z = 11 mils y=1209 pa1 y=1473 pa0 y=2469 vbat y=2723 vddca y=3439 reset rcin y=1253 y=3708 pc1 y=4005 x = 4 5 8 9 p d 3 x = 4 0 5 p a 3 x = 5 2 2 y=4211 p c 2 x = 4 0 8 2 x = 4 5 4 5 t e s t package so24 package. see dimensions in section 10.
em65xx copyright ? 2005, em microelectronic-marin sa 15 www.emmicroelectronic.com 5. em6517 a new complete specification exists on the em6517. please refer to this document on our web site. (http://www.emmarin.com/) for more information or questions please contact em headquarters or your local em office.
em65xx copyright ? 2005, em microelectronic-marin sa 16 www.emmicroelectronic.com 6. EM6520 a new complete specification exists on the EM6520. please refer to this document on our web site. (http://www.emmarin.com/) for more information or questions please contact em headquarters or your local em office.
em65xx copyright ? 2005, em microelectronic-marin sa 17 www.emmicroelectronic.com 7. em6521 a new complete specification exists on the em6521. please refer to this document on our web site. (http://www.emmarin.com/) for more information or questions please contact em headquarters or your local em office.
em65xx copyright ? 2005, em microelectronic-marin sa 18 www.emmicroelectronic.com 8. em6522 a new complete specification exists on the em6522. please refer to this document on our web site. (http://www.emmarin.com/) for more information or questions please contact em headquarters or your local em office.
em65xx copyright ? 2005, em microelectronic-marin sa 19 www.emmicroelectronic.com 9. em6540 standard operating conditions parameter min typ max unit description temperature 0 25 60 c 2.2 3.6 5.5 v fq max 620 khz vdd 2.5 3.6 5.5 v fq max 680 khz vss 0 v reference terminal cvreg (note 1) 0.22 1 f regulated voltage capacitor fq 600 khz nominal frequency dc characteristics - power supply pins vdd=3v, t=25c (unless otherwise specified) parameter conditions symb. min. typ. (note1) max. unit active supply current 25c ivdda 210 a active supply current (in active mode) (note2) (note3) 0c...+60c i vdda 210 250 a standby supply current (in halt mode) (note3) 0c...+60c i vddh 10 15 a sleep supply current (sleep =1) (note3) 0c...+60c i vdds 0.4 1 a por voltage v por 1.5 v ram data retention vrd 1.5 v regulated voltage vreg 1.85 v note1: measured at typical freq. of 600khz, no load. note2: test loop with successive writing and reading of two different addresses with an inverted values (five instructions should be reserved for this measurement), note3: not tested at temperature if delivered in chip form. metal options functionally the em6640 and the em6540 are the same except the metal options of the em6540 which are set in their default state.
em65xx copyright ? 2005, em microelectronic-marin sa 20 www.emmicroelectronic.com input/output port options pull-up controlled by software pull-down controlled by software 0 1 a0 pa0 input none 100k a1 pa1 input none 100k a2 pa2 input none 100k a3 pa3 input none 100k b0 pb0 in/out 100k 100k b1 pb1 in/out 100k 100k b2 pb2 in/out 100k 100k b3 pb3 in/out 100k 100k c0 pc0 in/out 100k 100k c1 pc1 in/out 100k 100k c2 pc2 in/out 100k 100k c3 pc3 in/out 100k 100k digital watchdog option mdigwd digital watchdog yes swbdatalevel option mswbdatalevel level of swb data vdd supply voltage level detector t= -10c to 60c symb. parameter min. typ. max. unit vsvld1 svld voltage level1 2.02 2.20 2.37 v vsvld2 svld voltage level2 2.30 2.50 2.70 v today?s versions i/o?s vld levels remarks em6540p04 as defined as defined -
em65xx copyright ? 2005, em microelectronic-marin sa 21 www.emmicroelectronic.com die, pad location and size package so18 package. see dimensions in section 10.
em65xx copyright ? 2005, em microelectronic-marin sa 22 www.emmicroelectronic.com pin out for the em6540 (mfp of the em6640) package: so18 pa0 pa1 pa2 pa3 pb0 pb1 pb2 test vreg psck psdio vss vbat pc3 pc2 pc1 pc0 pb3 3 16 4 15 5 14 6 13 7 12 8 11 9 10 1 18 2 17 e m 6 5 4 0 mfp programming connection for field programming 16 3 15 4 14 5 13 6 12 7 11 8 10 9 18 1 17 2 e m 6 5 4 0 vss vbat qin qout test vreg mfp programer mfp programer
em65xx copyright ? 2005, em microelectronic-marin sa 23 www.emmicroelectronic.com 10. package dimensions all mfps are available in chip form on special request. figure 1. sop 18 pin package (1.27mm pitch, 300mils body width) sop-18 figure 2. sop 24 pin package (1.27mm pitch, 300mils body width) sop-24
em65xx copyright ? 2005, em microelectronic-marin sa 24 www.emmicroelectronic.com figure 3. sop 28 pin package (1.27mm pitch, 300mils body width) sop-28
em65xx copyright ? 2005, em microelectronic-marin sa 25 www.emmicroelectronic.com figure 4. tqf 44 pin package d d1 a e see detail "b" package outline, tqfp, 10x10 mm body, 1.00/0.10 mm form, 1.00 mm thick top view b see detail "a" e odd lead sides even lead sides detail "a" all dimensions in millimeters 0.30 min. 0.95 0.05 0.45 e n b l a 1 a d d 2 1 a o l y m b 44 0.80 bsc 0.37 0.60 0.45 0.75 10.00 bsc. 12.00 bsc. 1.00 typ. 0.15 1.05 1.20 max. tqfp44 s a1 a2 l detail "b" 1.00 ref. 0.20 min. 0.08 r. min. 0-7 0 min. 0.08/0.20 r.
em65xx copyright ? 2005, em microelectronic-marin sa 26 www.emmicroelectronic.com figure 5. tqf 52 pin package d d1 a e see detail "b" package outline, tqfp, 10x10 mm body, 1.00/0.10 mm form, 1.00 mm thick top view b see detail "a" e odd lead sides even lead sides detail "a" all dimensions in millimeters 0.22 min. 0.95 0.05 0.45 e n b l a 1 a d d 2 1 a o l y m b 52 0.65 bsc 0.32 0.60 0.38 0.75 10.00 bsc. 12.00 bsc. 1.00 typ. 0.15 1.05 1.20 max. tqfp52 s a1 a2 l detail "b" 1.00 ref. 0.20 min. 0.08 r. min. 0-7 0 min. 0.08/0.20 r.
em65xx copyright ? 2005, em microelectronic-marin sa 27 www.emmicroelectronic.com figure 6. tqf 64 pin package d d1 a e see detail "b" package outline, tqfp, 10x10 mm body, 1.00/0.10 mm form, 1.00 mm thick top view b see detail "a" e odd lead sides even lead sides detail "a" all dimensions in millimeters 0.17 min. 0.95 0.05 0.45 e n b l a 1 a d d 2 1 a o l y m b 64 0.50 bsc 0.22 0.60 0.23 0.75 10.00 bsc. 12.00 bsc. 1.00 typ. 0.15 1.05 1.20 max. tqfp64 s a1 a2 l detail "b" 1.00 ref. 0.20 min. 0.08 r. min. 0-7 0 min. 0.08/0.20 r. for more information or questions please cont act em headquarters or your local em office.
em65xx copyright ? 2005, em microelectronic-marin sa 28 www.emmicroelectronic.com 11. ordering information ordering part number part number package/die form delivery form/ thickness em6503%%%so24a 24 pin soic stick em6503%%%wp11 die in waffle pack 11 mils em6504%%%so24a 24 pin soic stick em6504%%%wp11 die in waffle pack 11 mils em6505%%%so24a 24 pin soic stick em6505%%%wp11 die in waffle pack 11 mils em6517%%%so28a 28 pin soic stick em6517%%%wp11 die in waffle pack 11 mils EM6520%%%tq44d tqfp 44 pin trays (plate) EM6520%%%wp11 die in waffle pack 11 mils em6521%%%tq52d tqfp 52 pin trays (plate) em6521%%%wp11 die in waffle pack 11 mils em6522%%%tq64d tqfp 64 pin trays (plate) em6522%%%wp11 die in waffle pack 11 mils em6540%%%so18a 18 pin soic stick em6540%%%wp11 die in waffle pack 11 mils please make sure to give the complete part number when ordering, including t he 3-digit version. the version is made of 3 digits %%%: the first one is a letter and the last two are numbers, e.g. p04 , p07, p12, etc. for other delivery forms, please cont act em microelectronic-marin s.a. em microelectronic-marin sa (em) makes no warranty for the us e of its products, other than those expressly contained in the company's standard warranty wh ich is detailed in em's general terms of sale located on the company's web site. em assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herei n at any time without notic e, and does not make any commi tment to update the information contained herein. no licenses to patents or other intellectual pr operty of em are granted in c onnection with the sale of em products, expressly or by implications. em's products are not authorized for use as components in life support devices or systems. ? em microelectronic-marin sa, 10/05, rev. i

▲Up To Search▲

Price & Availability of EM6520

	To Download EM6520 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .